Pride Mobility Lift Chair Hand Control ELEASMB5285 And Others


$56.75


buy-now-amazon-button

Pride Mobility Lift Chair Hand Control ELEASMB5285 And Others

buy now

$56.75



This is a thumb switch type hand control with a plug that has a straight five (5) pin connector that unplugs either in the side pocket or the back of the chair; it plugs to an extension cable, and then that extension cable goes on down to either the motor or the transformer on the chair (depending on the chair type). Just follow your hand control cord down past the handle, and past the curly cord, and then look about 8″-10″ past the curly part, you should find that straight connector. Our control will work for most any standard single motor chair that has the thumb switch type control and the quick disconnect plug shown in the small pictures above. It was originally sold for chairs with the newer Okin, Limoss, and FBS electrical systems., but will work on the older Dewert systems also.Thumb Switch Control With Quick Disconnect Plug
Has Straight Five Pin Plug about 6 Inches From Where the Curly Cord Stops
Plastic Lever Folds Over and Locks the Two Plugs in Place
May Have the Numbers 5285 or KC-7059 on White Tag on Cord By Plug End
Please See Product Description Below for More Information